Seat Mounted Adjustable Cup Holder

Product Details

Keep your interior dry and your drink secure. Rennline's Adjustable Seat Mounted Cup Holder protects your cabin from spills while keeping hydration within reach. Featuring spring-loaded ball detents in the ratcheting arm, your drink stays securely in your preferred position during spirited driving. Constructed entirely from precision-machined aluminum, the unit is durable yet lightweight. When not in use, the arm swings tucked away under the seat for a clean, factory look. Fitment: Porsche & Universal Applications While engineered specifically for the 1974-1989 Porsche 911/912 , the modular design of the SA05 bracket has made this a go-to solution for other custom applications where the seat rails sit significantly higher than the floor.

Technical Specifications:

Vertical Clearance (Crucial): Designed for seat rails that sit 3 to 4 inches off the floor . (See SKU SA05.09 for ~2" clearance or SA05.14 for floor-mounted rails).

Bolt Size: Pre-drilled for M6 seat bolts (Standard on vintage Porsche manual rails).

Note: Bracket can be drilled out to accept M8 hardware if required.

Rail Slot Dimensions:

Tab Width: .591" (15.01mm). Fits vintage Keiper/Recaro rails. (Modern "Universal" sliders with 12-13mm slots will require filing the tab down).

Insertion Depth: Tab length is 41.2mm, allowing the bracket to secure onto bolts recessed up to ~31mm inside the rail channel.

Cup Capacity: ID of cup holder opening is 3.125" . Be sure to check your cup if you are worried your big gulp won't fit!

RHD Compatibility: This unit is fully reversible for Right-Hand Drive vehicles. Installation requires flipping the seat rail mounting bracket and transferring the 4 ball plungers to the opposite side.

• Technical Specifications: Vertical Clearance (Crucial): Designed for seat rails that sit 3 to 4 inches off the floor . (See SKU SA05.09 for ~2" clearance or SA05.14 for floor-mounted rails).
• Bolt Size: Pre-drilled for M6 seat bolts (Standard on vintage Porsche manual rails). Note: Bracket can be drilled out to accept M8 hardware if required.
• Insertion Depth: Tab length is 41.2mm, allowing the bracket to secure onto bolts recessed up to ~31mm inside the rail channel.
• Cup Capacity: ID of cup holder opening is 3.125" . Be sure to check your cup if you are worried your big gulp won't fit!

Fitment Guide

Notes

• Installation Difficulty: 1 out of 5.
• Designed for seat rails that sit 3 to 4 inches off the floor. For rails at approximately 2 inches, see SA05.09. For floor-mounted seat rails, see SA05.14.
• Pre-drilled for M6 seat bolts (standard on vintage Porsche manual rails). Can be drilled out to accept M8 hardware.
• Tab width .591" (15.01mm) — fits vintage Keiper/Recaro rails. Modern universal sliders with 12-13mm slots require filing the tab down slightly.
• RHD compatible: fully reversible. Flip the seat rail mounting bracket and transfer the 4 ball plungers to the opposite side.

FAQ

Q: Does this fit my vehicle?

A: See the Fitment Guide tab for compatible models. Contact us if you have questions before ordering.