GT3 Style Lower Control Arm - Left

Product Details

If you're looking for more negative camber on your 996 | 997 | 986 | 991 | 987 | 981 | 982/718 and increased handling performance, then look no further than the Rennline GT3 OEM-style control arms. Superior to the single-piece factory arm with added performance and durability, quickly and easily adjust your camber at each corner to suit your driving style and/or track needs.

Sold individually. Also available as a pair here.

• Control arm body constructed from forged 6082-T6 aluminum
• Increased strength over OEM GT3 arm due to forging process
• M6x1.0 Zerk fitting (pre-greased, used for re-greasing)
• 6061-T6 aluminum inner control arm bushing
• 75A durometer inner control arm and thrust arm bushings
• Natural rubber bushings
• Forged Rennline logo on the outer section
• 2-piece design

Fitment Guide

Notes

• Caster adjustable thrust arm bushing (Center hole position used for stock caster settings)
• Additional negative camber is achieved with shims (available here)
• Litronic brackets may be needed for your application (available separately)
• Thrust arm spacers (available here) are required for use on:
  • 997 | 991 | 987 | 981 | 982/718
• Not compatible with 991 GT3 & 981/718 GT4 models due to different control arm design
• OEM+ upgrade for front & rear of all 996 | 997 | 987 | 981 | 982/718 | (991 front only)

Torque Values:

• Bushing to control arm: 27 Nm (20 lb-ft)
• Inner control arm bushing to body: 120 Nm (89 lb-ft)
• Thrust arm to control arm: 160 Nm (118 lb-ft)
• Outer ball joint: 75 Nm (56 lb-ft)

FAQ

Q: Does this fit my vehicle?

A: See the Fitment Guide tab for compatible models. Contact us if you have questions before ordering.