One of the only weak points on the 964
and 993 chassis
is the engine carrier. When these models are tracked, or are fitted with
stiffer than stock engine mounts, the engine carrier should be reinforced.
If it is not, the carrier is known to bend, crack, or even break cleanly
away from an engine mount in response to increased vibration and stress.
The Porsche factory was aware of this problem and equipped its race cars
with a reinforced engine carrier. Rennline now exclusively offers an engine
mount reinforcement gusset kit that can be welded to the engine carrier
by your shop.
Not a welder? Let rennline take care of this for you. Simply send us
your motor mount, we will sandblast your carrier, expertly weld on the
reinforcement,and will repaint the new carrier to look stock for $250
including the gusset. Send to this address.
Once we recieve your mount, a Rennline representative will contact you
reguarding payment. There is generally a 4 day turn around time once payment
is received.
Right Click and Save As to view these installation
instructions.
All
manufacturer's names, symbols and descriptions are
used for reference only. They do not imply that
any listed product is the product of these
manufacturers unless otherwise noted. Porsche,
Boxster, Carrera, Targa, and the Porsche Crest are
registered trademarks of Porsche
AG.
